Web Site Content & Categories
Products & Services
- HAMILTON CHANGER MARS BILL VALIDATOR 2600 RETROFITKIT
- HAMILTON CHANGER MARS BILL VALIDATOR 2600 RETROFIT KIT W/ CHIP 1-5-10, HARNESS, AND PLATE
- HAMILTON STAINLESS STEEL BUTTON RETROFIT KIT
HAMILTON STAINLESS STEEL BUTTON RETROFIT KIT
- HIGH PRESSURE AXIS ARCH SIDE TURBO
- 18GPM
- HIGH PRESSURE AXIS ARCH TOP & SIDES
- 36GPM
- HIGH PRESSURE AXIS ARCH TOP PROFILE
- 18GPM
- HIGH PRESSURE GUN SWIVEL
HIGH PRESSURE GUN SWIVEL, BRASS 3/8" MPT X FPT 3000PSI
- HIGH PRESSURE NOZZLE
HIGH PRESSURE NOZZLE #2507 1/8"MPT STAINLESS STEEL
- HIGH PRESSURE PUMP STACKING LEGS
Leg extensions are designed for stacking any two single pump station on top of each other in order to conserve space in the epuipment room.
- HIGH PRESSURE PUMP STACKING LEGS-D35
- Leg extensions are designed for stacking any smaller pump station on top of the 38GPM 30H.P. "work horse" HPPUMPSTATION02 in order to conserve space in the equipment room.
- HIGH PRESSURE PUMP STATION 10HP8GPM
- The Cat Pump High Pressure Pumping Station is designed to incorporate two Cat 5CP Pumps on a single pumping station frame. These pumps deliver 4 gpm @ 1,500 psi, totaling eight gallons per minute.
- HIGH PRESSURE PUMP STATION 15HP12GPM
- This High Pressure Pumping Station is designed to deliver 12 gpm @ 1,500 psi.
- HIGH PRESSURE PUMP STATION 15HP20GPM
- High Pressure Pump Station, delivers 18 gpm @ 1,000 psi with a Wanner H25 diaphragm pump belt-driven by a 15 HP 3 phase electric motor.
- HIGH PRESSURE RUBBER COATED STEEL WAND
HIGH PRESSURE RUBBER COATED STEEL WAND 1/4"MPT X 1/8"FPT X 18"
- High Pressure Transit Wash 414
- Our most versatile machine utilizes high volume quadra jet spinners to clean fleets of any size or shape, from subcompacts to 9'; wide by 14'; high. The HPW 414 assures the fleet manager with future expansion plans that the machine purchased will fit the vehicles rather than forcing the vehicles to fit the wash system.
- HIGH PRESSURE TURBO NOZZLE 0DG 3GPM
- BRASS 1/4 FPT
- HIGH PRESSURE WHEEL BLASTER SET
- Three spray nozzles, offer adjustable spray angle, zero degree impact while rotating in a 15 degree coverage pattern.
- HORIZNTL MOUNT BRCKT SET
- Perfect for mounting any foam applicator onto existing equipment.
- HORIZNTL TRIPLE R/A MOUNT
- Achieve total flexibility.
- HOSE - 3/8" HIGH PRESSURE BAY HOSE
HOSE - 3/8" HIGH PRESSURE BAY HOSE BLUE NON MARKING 3000PSI - 3/8"MPT X 12, 13 or 14' WITH CRIMPED ENDS AND STRAIN RELIEF
- HOSE - FOAM BRUSH COMPLETE
HOSE - FOAM BRUSH COMPLETE 3/8"MPT X 3/8"MPT WITH CRIMPED ENDS AND STRAIN RELIEF'S
- HP PUMP STATION 30HP38GPM
- This High Pressure Pumping Station "work horse" is designed with a Wanner D35 Hydra-Cell diaphragm pump belt-driven by a 30 H.P. 3 phase electric motor to deliver 38 gpm @ 1,100 psi.
- HP PUMP STATION 5HP4GPM
- This High Pressure Pumping Station is designed to deliver 4 gpm @ 1,500 psi.
- HP PUMP STATION 7.5HP9GPM
- This High Pressure Pumping Station is designed with a Wanner D10 Hydra-Cell diaphragm pump belt-driven by a 7.5 H.P. 3 phase electric motor to deliver 9 gpm @ 1,100 psi.
- HP WHEEL BLASTER SYSTEM
- High pressure wheel blaster system is a simple and effective solution that cleans wheels and tires without the added labor associated with a manual spray gun.
- HUDSON FLOAT VALVE
HIGH TEMPERATURE
- HYDROMINDER #506
- HYDROMINDER #506 W/MOUNTING BRACKET 4.5 GPM
- HYDROMINDER #507
- HYDROMINDER #507 W/OUT MOUNTING BRACKET 4.5 GPM
- HYDROMINDER #511
- HYDROMINDER #511, LOW VOLUME UNIT W/SIPHON BREAKER 4.5 GPM
- HYDROMINDER #530
MEDIUM VOLUME WITH SIPHON BREKER 9.5GPM
- HYDROMINDER #561
MEDUIM - HIGH VOLUME (16.0 GPM)
- HYDROMINDER #563
HIGH VOLUME WITH SIPHON BREAKER AND MOUNTING BRACKET (25 GPM)
- HYDROMINDER #572
WATER VALVE WITH MOUNTING BRACKET (35+ GPM)
- HYDROMINDER DIAPHRAGM
- HYDROMINDER DIAPHRAGM
- HYDROMINDER METERING TIP KIT FOR ALL MODELS-THREADED
- HYDROMINDER METERING TIP KIT FOR ALL MODELS-THREADED
- HYDROMINDER REPAIR KIT
- HYDROMINDER REPAIR KIT